Features & Benefits

• Front or Bottom Return Air
• Offset Hanging Brackets Attach to Unit and Wall to Allow Hanging Inside Closet
• Can be AHRI Matched with Most Brands of Air Conditioners or Heat Pumps
• ETL Listed for Use with Either R-22 or R-410A When a Proper Metering Device is Used
• Pre-Programmed, 5-Speed, ECM Motors that Ensure Higher Efficiency and Increased Energy Savings by Delivering Constant Torque During Operation
• Less than 2% Air Leakage from Cabinet when Tested in Accordance with ASHRAE Standard 193
• Unit Must be Installed According to Aspen Installation Instructions. Sturdy, Fully Insulated Galvanized Steel Cabinet
• Stick Pins Ensure 1/2 Inch Insulation Remains in Place
• Direct Drive Multi-Speed Blowers Circulate Air Quietly and Efficiently
• Motor Speeds can be Easily Selected Via Motor Terminals
• Swing Mounted Blowers can be Easily Removed for Service
• Made in USA

Specifications

• Voltage Rating: 120 Volt AC Motor
• Current Rating: 9.1 Amp (MCA), 15 Amp (Fuse Beaker), 6.8 Amp (Motor)
• Power Rating: 1/2 HP Motor
• Cooling Capacity: 30000 BTU/Hour
• Installation: Vertical Wall Mount
• Enclosure Material: Fully Insulated Steel
• Enclosure Finish: Galvanized
• Size: 22 Inch Width x 18-3/4 Inch Depth x 44-1/2 Inch Height
• Approval: ETL (Canada and US)
• Refrigerant Type R-22, R-410A
• Connection Size 3/4 Inch
• Motor Type X13
• Heating Capacity 64000 BTU/Hour at 180 Deg F 3.5 GPM
• Metering Device Non-Bleed Air Conditioner or Heat Pump R-410 Thermostatic Expansion Valve
• Number of Heating Coil Rows 3
• Includes Taco 008 Bronze Pump
• Applicable Standard AHRI, HARDI