1/2 HP 1075 RPM 208-230V MOTOR
1/2 HP 1075 RPM 208-230V MOTOR
Description
Nidec Motor Corporation (US Motors) 0.5 HP, 208 to 230 VAC 60 Hz 1-Phase, 3.1 A, 1075 RPM, B Insulation, 48M Frame, Hub/Stud Mount, Reversible, 6-Pole, 1-Speed, OAO, Condenser Fan Motor
Features & Benefits
- All-Brass One-Piece Shell, Significantly Better than Steel
- May be Silver Brazed for Permanent Installation and Protection of System
- Minimal Space Required f Installation
- No Painted to Peel
- No Rust or Corrosion
- Single Cartridge Design
- Access Valve 1/4 Inch SAE Readily Permit Pressure Drop Reading
- Corrosion-Resistant Stainless Steel Bolt Permit Easy Access for Changing of Cartridge
- No Welds or Solder Joint, No Chance of Leak
Specifications
- Item: Filter Drier Shell
- Size: 4.63 Inch Width x 9.63 Inch Height
- Material: Brass
- Used On Item: HVACR System
- Applicable Standard: UL, CUL Bolt Torque Size 14 Foot-Pound; Connection Size 1-1/8 Inch ODS; Pressure Rating 700 PSIG
Documents
Specifications
- BrandUS Motors
- Bearing TypeSelf-Aligning
- BrandUS Motors
- Enclosure TypeOpen Drip Proof (ODP)
- Frame Size48Y
- HP1/2
- Number Of Poles6-Pole
- Number of Speeds1
- RotationClockwise, Counter Clockwise
- RPM1075
- RPM Range1001-1100
- Shaft Diameter5/8"
- TypePSC Blower Motor
- VarietySplit Phase
- Voltage208/230V
- Ambient60 °C
- CSA ListedTrue
- CSA ListingTrue
- Frequency60Hz
- Full Load Amps3.1
- Length10.9 in
- Motor Phase1
- Motor RPM1075
- Mounting MethodHub, Stud
- Run Capacitor7.5/370
- Service Factor1
- Shaft Length5 in
- Shipping Height7 in
- Shipping Length13 in
- Shipping Weight16 lb
- Shipping Width7 in
- UL ListedTrue
- UL ListedTrue
- UL RecognizedFalse
- UL RecognizedTrue
- Voltage208/230
- Weight16 lb