The R-2000 and 11V - R2000 consists of our 10 micron filtering media containing a unique blend of water absorbing polymers that are 'no-water soluble'. This means that once the water is removed and stored within the pleats, it won't be released down stream to the heating unit.

Features & Benefits

• Flame Signal Test Jack to Measure Amplifier Flame Signal Voltage
• Plug into 7800 Relay Module Through Printed Circuit Board Edge Connector Keyed for Proper Orientation
• Color-Coded Label Identify Flame Detection Type
• Dynamic Self-Check Amplifier Test the Detector and All Electronic Component in the Flame Detection System
• 7800 Series Relay Module Lock Out on Safety Shutdown with Flame Detection System Failure
• None (Standard) is Just Tested at Normal System Startup

Specifications

• Type: Rectification
• Operating Temperature: -40 to 140 Deg F
• Size: 3-9/16 Inch Length x 7/8 Inch Width x 3 Inch Height
• Approval: UL, CSA, FM
Flame Signal Strength Voltage Rating 0 to 5 Volt DC; Flame Failure Response Time 0.8 or 1 Second; Vibration 0.5 G; Color Green; Used On 7800 Series Relay Module, C7004/C7005/C7007/C7008/C7009 Rectifying Flame Rod, Q179 Flame Rectifier Gas Pilot (Gas)