The Amprobe ACD-14 TRMS-PLUS Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.

Features & Benefits

• Upflow or Horizontal Right as Shipped (Field-Convertible for Down-Flow or Horizontal Left Applications)
• Constant Torque ECM Speeds and Torques are Controlled by Software Embedded in the Motor to Maintain Constant Torque
• Motors are Pre-Programmed at the Factory
• Low Leakage Cabinet
• Direct Drive Blowers Circulate Air Quietly and Efficiently
• Electronic Control Board
• High Efficiency Rifled Copper Tubes/Enhanced Aluminum Fins Provide Maximum Heat Transfer
• Made in USA

Specifications

• Type: Multi-Position, High Efficiency
• Voltage Rating: 120 Volt AC (Motor)
• Current Rating: 14.3 Amp (MCA), 10.9 Amp (Motor), 25 Amp (Fuse)
• Frequency Rating: 60 Hertz
• Number of Phases: 1
• Power Rating: 1 HP
• Cooling Capacity: 48000 BTU/Hour
• Temperature Control Type: Thermostat
• Connection Type: Circuit Breaker
• Enclosure Material: Steel
• Enclosure Finish: Galvanized
• Size: 24-1/2 Inch Width x 22-1/4 Inch Depth x 57 Inch Height
• Approval: UL1995, ETL (Canada and US)
Heating Capacity 98000 BTU/Hour at 180 Deg F 3.5 GPM, 109950 BTU/Hour at 180 Deg F 5 GPM; Metering Device Non-Bleed Air Conditioner or Heat Pump R-410 Thermostatic Expansion Valve; Refrigerant Type R-22, R-410A; Number of Heating Coil Rows 4; Motor Type Constant Torque ECM; Flow Rate 1652 CFM (Tap 5) at 0.5 ESP; Exclude Pump and Check Valve; Applicable Standard AHRI, HARDI